热线电话:
400-021-7789
SD-1300
Suitable occasion: hotel, fast food restaurant, western restaurant, cold drink shop, coffee hall, ice factory and other places.

方形冰块的特点:
1、冰块硬度高,中心冰点可达零下18℃,冰块晶莹剔透,不易溶化。
2、六面体冰块使用方便,接触面大,可使饮料迅速冷却,口感更佳。
经典款直立式制冰机的特点:
采用上推门设计,造型美观,取冰便捷。
镀镍紫铜冰盘,制冰、掉冰迅速。
独创的“智能芯”,自动检测,提高机器稳定性和维护的便利性。
前置式散热器,便于清洗,先进的降噪技术,使噪音降低15%。
内胆、水槽、分水管均达到食品级国际标准,安全卫生。
储冰桶采用PE整体滚塑工艺,聚氨酯整体发泡,保温性能高。
采用品牌制冷配件,整机保修壹年。
Characteristics of erect ice machine
Arc pushing gate design, beautiful appearance, convenient to take the ice.
Nickel plated copper ice tray, fast ice and falling ice.
Bigger nickel plated copper ice tray, yield than similar products more than 10% above.
The original "intelligent core" makes the machine with stable performance, convenient maintenance.
Front mounted radiator, convenient cleaning, noise reduction technology advanced, low noise.
Inner tank, water tank, water pipe are up to food grade standards, safety and healthy.
Overall ice storage tank, the thermal insulation layer is integral foam, heat preservation performance is good.
风冷制冰机的安装要求:
1、 环境温度2~40℃,进水温度2~35℃,进水压力0.2Mpa~0.3Mpa
2、 安装空间:机器顶部及两侧距离墙不得小于20CM,后背部不得低于15CM。
德国EBM风机:风量大,噪音低,寿命长。
Germany EBM fan: big air volume, low noise, long life.
丹麦丹佛斯膨胀阀:流量调节精准,灵敏度高。
Denmark danfoss expansion valve: flow control precision, high sensitivity.
国际品牌压缩机:性能稳定,制冷量大。
International famous brand compressor: stable performance, large refrigerating capacity.
独创的“智能芯”:自动运行、自动检测、故障自动报警。
The original "intelligent core": automatic operation, automatic detection, automatic fault alarm.
采用园弧形上推门设计,造型美观,取冰便捷。
加大的镀镍紫铜冰盘,制冰迅速,产量比同类产品多出10%以上。
独创的“智能芯”,自动检测,提高机器稳定性和维护的便利性。
前置式散热器,便于清洗,先进的降噪技术,使噪音降低15%。
内胆、水槽、分水管均达到食品级国际标准,安全卫生。
储冰桶采用PE整体滚塑工艺,聚氨酯整体发泡,保温性能高。
Characteristics of erect ice machine
Arc pushing gate design, beautiful appearance, convenient to take the ice.
Bigger nickel plated copper ice tray, yield than similar products more than 10% above.
The original "intelligent core" makes the machine with stable performance, convenient maintenance.
Front mounted radiator, convenient cleaning, noise reduction technology advanced, low noise.
Inner tank, water tank, water pipe are up to food grade standards, safety and healthy.
Overall ice storage tank, the thermal insulation layer is integral foam, heat preservation performance is good.
分体式制冰机的特点
加大的镀镍紫铜冰盘,制冰迅速,产量比同类产品多出10%以上。
独创的“智能芯”,自动检测,提高机器稳定性和维护的便利性。
主机与储冰桶分离,运输方便,储冰量大。
内胆、水槽、分水管均达到食品级国际标准,安全卫生。
储冰桶采用PE整体滚塑工艺,聚氨酯整体发泡,保温性能高。
Characteristics of separated ice machine
Bigger nickel plated copper ice tray, yield than similar products more than 10% above.
The original "intelligent core" makes the machine with stable performance, convenient maintenance.
The ice machine and ice storage tank is separated, the transportation is convenient, the ice storage amount is large.
Inner tank, water tank, water pipe are up to food grade standards, safety and healthy.
Overall ice storage tank, the thermal insulation layer is integral foam, heat preservation performance is good.
560MM宽度设计,节省宝贵的营业空间,适用于面积狭小的场所。
Width 560MM, saving valuable space, applicable to the small place.
760MM宽度设计,储冰量大,适用于需要大量用冰的场所。
Width 760MM, ice storage capacity is big, applicable to need a lot of ice places.
产品中心